Thank you for visiting the booth of Marubeni Corporation and Miyoshi Oil & Fat.
This page provides details of the exhibited products.
You can send inquiries for products and sample request.
<Introduction of exhibited products>
◆EPOFLOC（Heavy metal scavenger）
◆Marubeni solution
◆EPOFLOC（Heavy metal scavenger）
Do you have any problems with heavy metal wastewater treatment?
“EPOFLOC” solves all heavy metal problems.
EPOFLOC is a liquid type chelating agent.
It has extremely high reactivity as it directly chelate bond with heavy metal ions in
wastewater and forms large floc which creates immediate precipitate.
Wide range of heavy metals can be treated efficiently with low dosage.
Features
●Efficient with low dosage
As EPOFLOC directly reacts with heavy metal ions and creates strong chelate bond, it can flocculate
and precipitate heavy metal ions even with low
dosage.
EPOFLOC reacts well with heavy metal ions even if
the wastewater is high concentrated complex
wastewater, which saves the dosage to be used.
●Wide variety of heavy metals can be treated
EPOFLOC reacts with variety of heavy metals such
as Chromium (Cr), Manganese(Mn), Iron (Fe),
Cobalt (Co), Nichel (Ni), Copper (Cu), Zinc (Zn),
Arsenic (As), Selenium (Se), Silver (Ag),
Cadmium (Cd), Mercury (Hg), Lead (Pb) and etc.
●Significant sludge reduction
Compared to the conventional chemicals,
EPOFLOC can reduce the amount of both agents
and additives to be used which results in significant sludge reduction.
You can see a video of the wastewater treatment flow using ”EPOFLOC” on a beaker scale and the difference from the conventional method.
●Fast Settling with Lower Dosage
EPOFLOC demonstrates high reactivity and delivers effective treatment with a low dosage.
In copper treatment tests, it was confirmed that to reduce the concentration well below the discharge standard of 3 mg/L—down to 0.02 mg/L or less—EPOFLOC required 200 mg/L less dosage than other products.
EPOFLOC forms large and stable flocs, enabling rapid sludge settling and easy solid-liquid separation. In the test, a clear difference in settling behavior was observed within 5 minutes of addition, contributing to more efficient treatment processes.
●Easy installation method
No need for large scale investment to install
EPOFLOC. All you need is tank and pump to
install and no need for adjustment of your facilities.
Case study
●High concentrated wastewater treatment
Semiconductor plant
Copper concentration reduced from 3090mg/L to 0.9mg/L after treatment.
Even the wastewater was high concentrated complex wastewater.
●Complex wastewater heavy metal treatment
Galvanization processing plant
EPOFLOC succeed to treat wastewater containing complex heavy metals at one time. In addition, EPOFLOC reduced the amount of agents to be used 90% compared to the conventional agents.
●Significant sludge reduction
Machinery manufacturer
Comparing to conventional chemicals, the amount of agents used reduce by 30%, Ferric chloride reduced by 75%, and sludge reduced by 25%.
Succeed to achieve total cost reduction.
●Processing performance that meets rigorous standards
Lead wastewater treatment
In lead wastewater treatment, EPOFLOC delivers higher removal performance with a lower dosage compared to other products.
These are just examples. Please contact us for more information.
◆Marubeni solution
Click here for Marubeni America Corporation Specialty Chemicals Division’s official website.
Information
Please contact the person in charge below
and we will inform you of the details.